The winch plate you need for your 2006 Arctic Cat 400 is the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15108. It attaches to what looks like a factory winch plate you have found on your quad.
The Superwinch part # SW1125220 you asked the question from will work well with this mount and your ATV too. I unfortunately wasn't able to find any info on wiring or relay information on your quad. You will need to check with the manufacturer or simply wire the winch directly which is... view full answer...
Dexter would be the final authority on the capacities of their axles. For 7k rated Dexter brake assemblies you would want the part # 23-465 for the right hand side and part # 23-464 for the left hand side.
What you described is not uncommon for Dexter axles. There are other instances where the difference between the capacities of two axle setups is either the assemblies or the hubs they put on them. view full answer...
We have an adapter to go from a 7-Way round pin on a tow vehicle to a 7-Way blade style on a trailer. You could use the # HM47425. But the length is not close to 4 or 5 feet.
What you could do is make an adapter. You would need 3 main parts: 7-Way round trailer side, # PK11702, 7-Way blade vehicle end, # PK12-707E, and 4 or 5 feet of jacketed 7-Wire, # DW04914-1. Just change the quantity on the wire page to the amount of feet you want. view full answer...
I really wish we had a bolt on solution but the tallest frame dimension we have a bolt on solution for is 5-1/2 inches like the Dutton Lainson part # DL22320. Only solution would be to weld the jack to the trailer. view full answer...
We've actually asked Superwinch this in the past and they've said that to add a handheld remove to a LT2000 kit you'd need the following components from a Terra series winch. You'd need the solenoid part # SW87-42608, the remote part # SW93GR, and the socket part # SW87-42618 and you'd be set. view full answer...
Go To Results